CERTIFIED TO AS9100D / ISO 9001:2015

CNC TURNING

• (19)  CNC LATHES, (3) WITH BAR FEED UP TO 2.50 INCH DIAMETER.

THESE INCLUDE:

• (3)  KIA TURN 21 2" DIA BAR CAPACITY
• (2)  KIA TURN 28 2.625" DIA BAR CAPACITY
• (2) KIA SKT300 3.500" DIA BAR CAPACITY
• (2) SMART MACHINE TOOLS SL 20 2" DIA BAR CAPACITY
• (1)  SEIKI HI-TEC TURN 20 SII -2.50 INCH BARFEED
• (1)  SEIKI HI-TEC TURN 20 SII -2.00 INCH BARFEED
• (1)  FEELER FTC 200 W/ LNS BARFEED 2.625" BAR CAPACITY
• (1)  YCM SUPERMAX TC-26 3" DIAMETER BAR CAPACITY
• (1)  HYUNDAI WIA E160A TURNING CENTER
• (1) KIA TURN 21 W/LNS BAR LOADER 2.25" DIA BAR CAPACITY
• (1) KIA KIT 30b
• (1) HYUNDAI KIA 21LMS 2.625" DIA BAR CAPACITY
• (1) HYUNDAI KIA 250SY 3" DIA BAR CAPACITY
• (1) HARDINGE CHNC-1 1.625" BAR CAPACITY

CNC MILLING

FULLY EQUIPPED CNC MILLING DEPARTMENT FEATURING A VAST ARRAY OF VISES, SINE PLATES AND ANGLE IRONS

EQUIPMENT INCLUDES:

• (17)  CNC MILLING CENTERS 8.5-32 HP UP TO 20.0 X 44.0 TABLE TRAVEL WITH (1) FULL 4TH AXIS ROTARY TABLE, AND (2) ADDITIONAL INDEXABLE 4TH AXIS TABLES

THESE INCLUDE:

• (1)  SUPERMAX V116E- CAT 50 TAPER
• (3) SUPERMAX 1020A XV 1020 A
• (1) SAMSUNG PCV 400 W/4TH AXIS TSUDAKOMA INDEXER
• (1) SAMSUNG MCV 400 W/FULL 4TH AXIS TSUDAKOMA ROTARY, RENISHAW PROBING SYSTEM
• (2)  KIA VA50 VERTICAL MACHINING CENTER - CAT 50 TAPER
• (2)  KIA VA40 VERTICAL MACHINING CENTER
• (1)  SMW INDEXER
• (1)  ROBODRILL VERTICAL MACHINING CENTER ALPHA - T14iFa W/4TH AXIS
• (2)  DMG MORI MILLING CENTERS WITH FULL 4TH AXIS TSUDAKOMA Rotary, 12" & 8"
• (1) ARES SEIKI S-3030 VERTICAL MACHINING CENTER W/ DUAL PALLET TABLE
• (1) HYUNDAI KIA KV25p MACHINING CENTER W/DUAL PALLET TABLE
• (1) CAMPRO CSP 1100i MACHINING CENTER

OTHER SPECIAL PURPOSE MACHINES

• (1  )SUNNEN HONE- MODEL : 1600 - HONING I.D.s FROM 1/6 TO 2.00 INCH DIA.
• (2) TRINCO SANDBLAST CABINETS MODEL 38/BP
• (1)  ELDORADO M75 DEEP HOLE GUN DRILLER
• (1)  COSEN MODEL C-300NC CUT OFF SAW W/FULL STROKE VICE
• (2)  GROB 24 INCH VERTICAL BANDSAW
• (2)  L 7 L SPECIAL FURNACE W/ DYNATROL FOR HEAT TREATING UP TO 2350 DEGREES
• (1) SIC-MARKING L-BOX COLUMN MOUNTED LASER MARKING SYSTEM

GRINDING

• (1) 16/32 DX OKAMOTO SURFACE GRINDER
• (2)  12/24 OKAMOTO SURFACE GRINDERS
• (1)  TACHELLA OD & ID GRINDER
• (1)  HARIG 618 AUTOSTEP 18 INCH SURFACE GRINDER
• (1) HARIG 612 AUTOSTEP 18 INCH SURFACE GRINDER

MANUAL TURNING

• (1) KOHEMA MANUAL LATHE W/ PATHFINDER READOUT
• (2) CHINHUNG MANUAL LATHES
• (1) CHINHUNG MANUAL LATHE W/ NEWALL DIGITAL READOUT
• (1) TAKISAWA 13" X 36" MANUAL LATHE W/ TRAV-A-DIAL
• (1) KERREY 15" X 40" MANUAL LATHE W/ TURNVISION DIGITAL READOUT
• (1) SOUTH BEND 10" MANUAL LATHE

MANUAL MILLING

• (4)  SUPERMAX VERTICAL BRIDGEPORTS WITH ACU-RITE READOUTS INCLUDING (1) WITH 4TH AXIS ROTARY TABLE
• (1)  PROTOTRAK TRM - MX2e CONTROL
• (1) BRIDGEPORT SERIES 1 VERTICAL TURRET MILLING MACHINE W/ 2 AXIS DIGITAL READOUT

‍

INSPECTION

FULLY EQUIPPED INSPECTION LAB INCLUDING A VAST ASSORTMENT OF GAGES, MICROMETERS, GAGE PINS AND THREAD GAGES

EQUIPMENT INCLUDES:

• (1) ABERLINK AXIOM TOO HS CMM
• (1)  AM SCOPE (FLOURESENT) MODEL FRL8 WITH CAMERA
• (4) AM SCOPE (FLOURESENT) MODEL FRL8
• (1)  BROWN & SHARPE CMM GAGE 2000 WITH 18 INCH X 20 INCH X 16 INCH MEASURING RANGE
• (1)  ST INDUSTRIES OPTICAL COMPARITOR WITH QUADRA CHECK 200 DRO10X AND 20X MAGNIFICATION (WITH ON-SITE COMPARITOR CHART CAPABILITIES)
• (1)  BROWN & SHARPE SWISS MICRO HITE(1)FOWLER DELUXE STEREO ZOOM MICROSCOPE
• (1) FOWLER DELUXE STEREO ZOOM MICROSCOPE
• (1)  JONES & LAMSON 14 INCH OPTICAL COMPARITOR WITH LIGHT DEFLECTOR
• (1)  TESA-HITE 700 ELECTRONIC HEIGHT GAGE
• (2) FOWLER TRIMOS V5 28" ELECTRONIC HEIGHT GAGE
• (1)  MITUTOYO CRYSTA-PM443 CMM
• (1) MITUTOYO SJ-210 SURFACE ROUGHNESS TESTER
• (1)  GOKO SEIKI HARDNESS TESTER
• (1)  SP1 14-416-2 PORTABLE ROUGHNESS TESTER

COMPLETE WELDING DEPARTMENT

INCLUDES MIG, TIG, AND BRAZING

COMPLETE ASSEMBLY DEPARTMENT